sta-number start-threshold

Function

The sta-number start-threshold command sets the start threshold for load balancing based on the number of users in a static load balancing group.

The undo sta-number start-threshold command deletes the configured start threshold for load balancing based on the number of users in a static load balancing group.

By default, the start threshold for load balancing based on the number of users in a static load balancing group is 10.

Format

sta-number start-threshold start-threshold-value

undo sta-number start-threshold

Parameters

Parameter	Description	Value
start-threshold start-threshold-value	Specifies the start threshold for load balancing based on the number of users in a static load balancing group.	The value is an integer that ranges from 1 to 40.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

You can use this command to set the start threshold for load balancing based on the number of users in a static load balancing group. If the load on a radio does not reach the start threshold, the device does not implement load balancing control on access STAs.

Example

# Set the start threshold for load balancing based on the number of users in the static load balancing group to 5.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] sta-number start-threshold 5