sta-offline-delay full-sta-reject enable

Function

The sta-offline-delay full-sta-reject enable command disables an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

The undo sta-offline-delay full-sta-reject enable command enables an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

By default, an AP is enabled to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

Format

sta-offline-delay full-sta-reject enable

undo sta-offline-delay full-sta-reject enable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the STA offline delay function is enabled on an AP, you can run this command to enable an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

Prerequisites

Before this command is executed, the sta-offline-delay enable command has been executed to enable the STA offline delay function.

Example

# Disable an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-offline-delay enable
[HUAWEI-wlan-view] sta-offline-delay full-sta-reject enable