sta-offline-delay max-number

Function

The sta-offline-delay max-number command sets the maximum number of STAs that are allowed to delay going offline.

The undo sta-offline-delay max-number command restores the default maximum number of STAs that are allowed to delay going offline.

The default maximum number of STAs that are allowed to delay going offline is one fifth of the maximum number of STAs supported by an AC.

Format

sta-offline-delay max-number max-number

undo sta-offline-delay max-number

Parameters

Parameter	Description	Value
max-number	Specifies the maximum number of STAs that are allowed to delay going offline.	The value is an integer that ranges from 1 to the maximum number of STAs supported by an AC. The default value is one fifth of the maximum value. If one fifth of the maximum value is a non-integer value, round down the value.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the STA offline delay function is enabled, you can run this command to set the maximum number of STAs that are allowed to delay going offline.

Set the maximum number of STAs that are allowed to delay going offline based on the network requirements and device performance. A large value causes the STA offline delay function to occupy many resources, affecting new STA access. A small value cannot achieve a noticeable effect in releasing the load on the authentication server.

Prerequisites

The STA offline delay function has been enabled using the sta-offline-delay enable command.

Example

# Set the maximum number of STAs that are allowed to delay going offline to 800.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-offline-delay enable
[HUAWEI-wlan-view] sta-offline-delay max-number 800