traffic-optimize multicast-unicast dynamic-adaptive disable

Function

The traffic-optimize multicast-unicast dynamic-adaptive disable command disables adaptive multicast-to-unicast conversion in a traffic profile.

The undo traffic-optimize multicast-unicast dynamic-adaptive disable command enables adaptive multicast-to-unicast conversion in a traffic profile.

By default, adaptive multicast-to-unicast conversion is enabled in a traffic profile.

Format

traffic-optimize multicast-unicast dynamic-adaptive disable

undo traffic-optimize multicast-unicast dynamic-adaptive disable

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After adaptive multicast-to-unicast conversion is enabled, when the air interface performance becomes a bottleneck during multicast-to-unicast conversion, an AP automatically switches the multicast group containing the minimum number of STAs to the multicast mode. After the air interface performance is improved and keeps being improved for a period of time, the AP automatically switches the multicast group containing the maximum number of STAs to the unicast mode. In this way, the air interface performance is automatically adjusted without manual intervention, improving wireless user experience.

Pre-configuration Tasks

The multicast-to-unicast conversion function has been enabled in the traffic profile using the traffic-optimize multicast-unicast enable command.

Example

# Disable adaptive multicast-to-unicast conversion in traffic profile p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize multicast-unicast enable
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize multicast-unicast dynamic-adaptive disable