traffic-optimize multicast-unicast enable

Function

The traffic-optimize multicast-unicast enable command enables the function of converting multicast packets to unicast packets in a traffic profile.

The undo traffic-optimize multicast-unicast enable command disables the function of converting multicast packets to unicast packets in a traffic profile.

By default, the function of converting multicast packets to unicast packets is disabled in a traffic profile.

Format

traffic-optimize multicast-unicast enable

undo traffic-optimize multicast-unicast enable

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can enable the function of converting multicast packets to unicast packets in scenarios that have high requirements on multicast stream transmission, such as a high-definition video on-demand scenario.

After the function is enabled, an AP listens on Report and Leave packets to maintain multicast-to-unicast entries. When sending multicast packets to the client, the AP converts the multicast packets to unicast packets based on the multicast-to-unicast entries to improve multicast stream transmission efficiency.

Example

# Enable the function of converting multicast packets to unicast packets in the traffic profile p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize multicast-unicast enable