type (IoT profile view)

Function

The type command sets the type for an IoT card.

The undo type command restores the default IoT card type.

The default type of an IoT card is common.

Format

type { cas-edu | common }

undo type

Parameters

Parameter	Description	Value
cas-edu	Specifies an IoT card that complies with IoT standards of the China Academy of Science.	-
common	Specifies an IoT card that complies with Huawei's IoT standards.	-

Views

IoT profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When Huawei ACs are used in the education system solution of the China Academy of Science, set the IoT card type to cas-edu. In other scenarios, set the IoT card type to common.

Precautions

After the IoT card type is modified in an IoT profile, other parameters in this IoT profile will restore to the default values.

If the iot-profile command has been executed to bind an IoT profile, the IoT card type cannot be modified. The IoT card type can be modified only after the IoT profile is unbound.

After the type cas-edu command is executed to set the card type to cas-edu, the config-agent permit ip-address and share-key commands cannot be executed.

In the education system solution of the China Academy of Science, an AP8150DN that is added offline does not support the personalized IoT card configuration in the AP view before the AP goes online. You can only configure an IoT card in the AP group view or perform the personalized IoT card configuration after the AP goes online.

Example

# Set the type of an IoT card to cas-edu.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] iot-profile name wlan-iot
[HUAWEI-wlan-iot-prof-wlan-iot] type cas-edu
Warning: After the card type is modified, related configuration items in the profile are cleared. Continue?[Y/N]:y