wired-port-profile (IoT card interface view)

Function

The wired-port-profile command binds a specified AP wired port profile to an IoT card.

The undo wired-port-profile command unbinds the AP wired port profile from an IoT card.

By default, no AP wired port profile is bound to an IoT card.

Format

wired-port-profile profile-name

undo wired-port-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of an AP wired port profile.	The AP wired port profile must exist.

Views

IoT card interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When an IoT card communicates with an AP through an Ethernet interface, to configure this Ethernet interface, you can set parameters in an AP wired port profile and bind it to the IoT card.

Prerequisites

The IoT card has been configured to communicate with the AP through an Ethernet interface using the card connect-type ethernet command.

Example

# Bind AP wired port profile wired-port1 to IoT card 1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wired-port-profile name wired-port1
[HUAWEI-wlan-wired-port-wired-port1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] card 1
[HUAWEI-wlan-group-card-group1/1] wired-port-profile wired-port1