uni-mng up-direction fabric-port
Function
The uni-mng up-direction fabric-port command configures AS service ports as an uplink fabric port's members.
The undo uni-mng up-direction fabric-port command cancels the configuration.
By default, AS service ports are not configured as members of uplink fabric ports.
This command can only be executed on an AS.
Format
uni-mng up-direction fabric-port member interface interface-type interface-number [ to interface-number ]
undo uni-mng up-direction fabric-port member interface interface-type interface-number [ to interface-number ]
undo uni-mng up-direction fabric-port member all
Parameters
| Parameter | Description | Value |
|---|---|---|
| member interface interface-type interface-number | Specifies the type and number of an AS service port to be configured as a member of an uplink fabric port. |
- |
| all | Specifies all AS service ports. |
- |
Usage Guidelines
Usage Scenario
To configure AS service ports as an uplink fabric port's members, run the uni-mng up-direction fabric-port command.
Precautions
A maximum of eight interfaces can be configured as a fabric port's members on an AS.
Stack ports cannot be configured as members of fabric ports. Similarly, fabric member ports cannot be configured as stack ports.
After the uni-mng up-direction fabric-port command is run on an AS, you must restart the AS to make the configuration take effect. If the AS is a stack, you need to restart all stack members. If a configuration conflicting with this command exists on the parent, the AS may fail to go online.
The command for configuring a stack ID and the command for configuring a fabric member port are mutually exclusive. Specifically:
If you have run the stack slot slot-id renumber new-slot-id command in a slot, you are not allowed to configure the service port of this slot as a member of an uplink fabric port.
If you have configured a service port of a slot as a member of an uplink fabric port, you are not allowed to run the stack slot slot-id renumber new-slot-id command to configure a stack ID in this slot.
When configuring a service port as a member of a fabric port, pay attention to the stacking configuration. A member port needs to be reconfigured if stack IDs change because the stack changes, for example, the stacking function is disabled, or existing stack IDs conflict after member switches are added to the stack.
Example
# Configure an AS service port as a member of an uplink fabric port.
<HUAWEI> uni-mng up-direction fabric-port member interface gigabitethernet 0/0/3
Warning: After a service port on an AS is configured as an uplink port, the AS needs to be restarted to make the configuration take effect.
If the parent has a configuration conflict with the AS, the AS may fail to go online. Continue? [Y/N]:y