The unicast-suppression auto-detect command configures the rate limit for unknown unicast packets during intelligent flow control.
The undo unicast-suppression auto-detect command restores the default rate limit for unknown unicast packets during intelligent flow control.
By default, the rate limit for unknown unicast packets is 128 pps.
Parameter |
Description |
Value |
---|---|---|
packets packets |
Specifies the rate limit for unknown unicast packets. |
The value is an integer that ranges from 64 to 1024, in pps. |
When there are a large number of broadcast, multicast, and unknown unicast packets, the CPU becomes busy processing these packets. When the traffic rate reaches the rate limit for intelligent traffic control, the device limits the rates of broadcast, multicast, and unknown unicast packets. You can run this command to specify a rate limit as required.