usb enable (AP system profile view)

Function

The usb enable command enables the USB function on an AP.

The undo usb enable command disables the USB function on an AP.

By default, the USB function on an AP is disabled.

The USB function is supported only by the AP7060DN, WA375DD-CE, AirEngine 5760-10, AP2050DN, AP2050DN-E, AP2050DN-S, AP2051DN, AP2051DN-E, AP2051DN-S, AP4030TN, AP4050DN-E, AP4051DN, AP4151DN, AP4051DN-S, AP4051TN, AP5050DN-S, AP6050DN, AP6150DN, AP6052DN, AP7050DE, AP7050DN-E, AP7052DE, AP7052DN, AP7152DN, R250D-E, R251D-E, AirEngine 8760-X1-PRO, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AirEngine 5760-22W, AirEngine 5760-22WD, and AirEngine 9700D-M.

Format

usb enable

undo usb enable

Parameters

None

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When users need to save or transfer files using the USB interface provided on some APs, the USB function can be enabled using the usb enable command. When the USB function is enabled, the power consumption of the AP will increase, which may affect other functions. You are advised to run the undo usb enable command to disable the USB function after using it.

Precautions

Some AP functions may be affected after the USB function is enabled. For details, see Understanding PoE in the Configuration - AP Management Configuration Guide-Managing the PoE Function of an AP.

The affected AP functions are restored after the USB function is disabled.

Example

# Enable the USB function in the AP system profile view.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] usb enable
Warning: When the USB function is enabled, the AP power consumption increases, which may affect the number of service flows and transmit power over the air interface. Continue? [Y/N]: y