upload config
Function
The upload config command saves the AS configuration to the flash memory of an AS and uploads the configuration file of the AS to the parent.
This command can only be executed on an AS.
Usage Guidelines
Usage Scenario
In independent mode, after services are configured on an AS using commands, you can run the upload config command to save the service configuration and upload the configuration file to the parent.
Precautions
- After this command is executed, the AS configuration file uploaded to the parent will be saved to the flash:/unimng/ind-cfg directory or the cfcard:/unimng/ind-cfg directory on some parent switch models. If the file name format is unimng-xxxx-xxxx-xxxx.zip (xxxx-xxxx-xxxx indicates the management MAC address of an AS), and the service configuration mode of this AS is independent mode, it is not allowed to delete this configuration file.
- After the upload config command is executed, the AS configuration file may fail to be uploaded to the parent. The possible causes include insufficient storage space on the parent and a fault of the link between the AS and parent.
- To prevent services from being affected, it is recommended not to delete the configuration file saved on the AS.
- The AS configuration file saved on the parent can ensure configuration integrity for the AS. For example, after an AS goes online again or is replaced, the AS will compare its saved configuration file with that saved on the parent. If the two files are inconsistent, the configuration file saved on the parent will replace the configuration file saved on the AS and take effect after the AS restarts.