The vcmp domain command configures a VCMP domain.
The undo vcmp domain command deletes a VCMP domain.
By default, no VCMP domain is created.
| Parameter | Description | Value |
|---|---|---|
| domain-name | Specifies the name of a VCMP domain. |
The value is a string of 1 to 31 case-sensitive characters without spaces. When double quotation marks are used around the string, spaces are allowed in the string. |
Usage Scenario
VLANs created and deleted on the VCMP server are synchronized to VCMP clients in the local VCMP domain by sending VCMP packets.
A VCMP domain specifies the scope for managed switches. All VCMP clients are managed by the VCMP server. You can run the vcmp domain command to configure a VCMP domain.
Precautions
All switches in a VCMP domain must use the same domain name either through manual configuration or automatic learning. If the domain name is not set on a VCMP client, the VCMP client learns the domain name in the first received VCMP packet.
Each switch can be added to only one VCMP domain. Switches in different VCMP domains cannot synchronize VLAN information.