The vm-user association-type command configures the association type of a virtual user.
Only the S5720-EI supports this command.
vm-user association-type { online | pre-online | offline } mac-address mac-address interface interface-type interface-number vlan vlan-id [ ip-address ip-address | profile profile-name | vsi vsi-name ] *
Parameter | Description | Value |
---|---|---|
online | Indicates that the association type of the virtual user is online. |
- |
pre-online | Indicates that the association type of the virtual user is pre-online. |
- |
offline | Indicates that the association type of the virtual user is offline. |
- |
mac-address mac-address | Specifies the MAC address of the virtual user. |
The value is in H-H-H format. H contains 1 to 4 hexadecimal digits. |
interface interface-type interface-number | Specifies the number or name of an interface for associating with a virtual user.
|
- |
vlan vlan-id | Specifies the VLAN to which the virtual user belongs. |
The value is an integer that ranges from 0 to 4094. |
ip-address ip-address | Specifies the IP address of the virtual user. |
The value is in dotted decimal notation. |
profile profile-name | Specifies the profile to which the virtual user belongs. |
The value is a string of 1 to 64 case-sensitive characters without spaces. |
vsi vsi-name | Specifies the name of the virtual site interface. |
The value is a string of 1 to 64 case-sensitive characters without spaces. |
Usage Scenario
In virtual network management, you must configure the function specified by the vm-user association-type command on the network management system (NMS) so that virtual users can access the network. The NMS then delivers the function configuration to the device. After receiving the related function configuration, the device automatically runs the vm-user association-type command to configure the association type of the virtual user.
Precautions
This command should be configured by the network administrator on the NMS and delivered to the device. You are not advised to directly run this command on the device.