wds-profile (AP group radio view or AP radio view)

Function

The wds-profile command binds a WDS profile to an AP radio.

The undo wds-profile command unbinds a WDS profile from an AP radio.

By default, no WDS profile is bound to an AP radio.

Format

wds-profile profile-name

undo wds-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of the WDS profile bound to an AP radio.	The WDS profile must exist.

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a WDS profile is bound to an AP radio, the radio will generate a WDS VAP to provide WDS services. The WDS VAP provides hidden SSIDs for WDS nodes to set up connections.

Prerequisites

A WDS profile has been created and configured properly.

Precautions

Among the VAPs created after a WDS profile is bound to an AP radio, the VAPs with the WLAN IDs 13 and 14 cannot be occupied.

An AP radio can only have one WDS profile bound.

This command has the same function as the wds-profile radio command. You can use either of them.

Example

# Bind the WDS profile test to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] wds-profile test
Warning: This action may cause service interruption. Continue?[Y/N]y