wds-profile radio

Function

The wds-profile radio command binds a WDS profile to an AP group or AP.

The undo wds-profile radio command deletes a WDS profile from an AP group or AP.

By default, no WDS profile is bound to an AP group or AP.

Format

wds-profile profile-name radio { all | radio-id }

undo wds-profile radio { all | radio-id }

Parameters

Parameter	Description	Value
profile-name	Specifies the name of the WDS profile bound to an AP or AP group.	The WDS profile must exist.
all	Binds a WDS profile to all AP radios.	-
radio-id	Binds a WDS profile to a specified AP radio.	The radio ID must exist.

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a WDS profile is bound to an AP or AP group, the AP radio will generate a WDS VAP to provide WDS services. The WDS VAP provides hidden SSIDs for WDS nodes to set up connections.

Prerequisites

A WDS profile has been created and configured properly.

Precautions

Among the VAPs created after a WDS profile is bound to an AP radio, the VAPs with the WLAN IDs 13 and 14 cannot be occupied.

An AP radio can only have one WDS profile bound.

Since the WLAN WDS and Mesh functions are mutually exclusive, the WDS and Mesh profiles cannot be applied to an AP radio at the same time.

Example

# Bind the WDS profile test to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] wds-profile test radio 0
Warning: This action may cause service interruption. Continue?[Y/N]y