The BFD session went Down. (Index=[Index], SessName=[ConfigurationName], LocalDiscriminator=[LocalDiscriminator], Diagnosis=[Diagnosis], BindIfName=[BindIfName], Description=[Description], FeNodeID=[FeNodeID], PeerIp=[PeerIp], LinkType=[LinkType], BindVpnName=[BindVpnName], TunnelName=[TunnelName], DownReason=[DownReason])
The status of a BFD session changed to Down.
Trap Attribute | Description |
---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwBfdSessFaultDown |
Trap OID |
1.3.6.1.4.1.2011.5.25.38.3.8 |
MIB |
HUAWEI-BFD-MIB |
Alarm ID |
0x00F102ce |
Alarm Name |
hwBfdSessFaultDown |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
Parameter | Description |
---|---|
Index |
Index |
ConfigurationName |
Session Configuration Name |
LocalDiscriminator |
Local Discriminator |
Diagnosis |
Diagnosis |
BindIfName |
Interface Name |
Description |
BFD Session Description |
FeNodeID |
Board ID of the session |
PeerIp |
Destination address of a session |
LinkType |
Session type |
BindVpnName |
Bound VPN Name |
TunnelName |
Tunnel Name |
DownReason |
Down reason |
VB OID | VB Name | VB Index |
---|---|---|
1.3.6.1.4.1.2011.5.25.38.2.3.1.4 |
hwBfdSessCfgName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.8 |
hwBfdSessLocalDiscr |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.18 |
hwBfdSessDiag |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.7 |
hwBfdSessBindIfName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.62 |
hwBfdSessDescription |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.63 |
hwBfdSessFeNodeID |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.56 |
hwBfdSessPeerInetAddr |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.64 |
hwBfdSessLinkType |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.21 |
hwBfdSessVPNName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.65 |
hwBfdSessTunnelName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.66 |
hwBfdSessDownReason |
hwBfdSessIndex |
1. Run the display bfd session all command to check whether the BFD session recovers.
2. Run the display current-configuration configuration bfd command to check whether BFD is disabled on either of both ends.
3. Run the display bfd session all command to check whether the BFD sessions are deleted on either end.
4. Run the ping ip-address command to check whether the link monitored by the BFD session is working properly.
5. Contact Huawei technical support personnel.
6. End.