BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.48 hwIPPoolIsolatedCauseMainboardReset
Trap Buffer Description
The master main control board is reset after the address pool is isolated. (PoolName=[PoolName],PoolIndex=[PoolIndex])
The master main control board was restarted after the address pool was isolated.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwIPPoolIsolatedCauseMainboardReset |
Trap OID |
1.3.6.1.4.1.2011.6.8.2.2.0.48 |
MIB |
HUAWEI-IPPOOL-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
PoolName |
Name of an address pool. |
PoolIndex |
Index of an address pool. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.6.8.1.1.1.2 |
hwIPPoolName |
hwIPPoolIndex |
Procedure
1. Wait for the master main control board to restart.
2. Check whether the address pool is isolated again.
- If so, go to Step 3.
- If not, go to Step 4.
3. Collect trap, log, and configuration information, and contact technical support personnel.
4. End.