BRASRDS_1.3.6.1.4.1.2011.5.25.40.15.2.2.1.6 hwRadiusCachePacketThresholdAlarm

Trap Buffer Description

The number of cached packets reached the upper limit. (MaxCachePackets=[hwRadiusMaxCachePackets],Threshold=[hwRadiusThreshold])

The number of cached packets reached the upper limit.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwRadiusCachePacketThresholdAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.40.15.2.2.1.6
MIB	HUAWEI-BRAS-RADIUS-MIB
Alarm ID	0x00F10136
Alarm Name	hwRadiusCachePacketThresholdAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	BRASRDS_1.3.6.1.4.1.2011.5.25.40.15.2.2.1.7 hwRadiusCachePacketThresholdResume

Trap Buffer Parameters

Parameter	Description
hwRadiusMaxCachePackets	Maximum number of accounting packets that can be cached
hwRadiusThreshold	Upper limit for packets that can be cached

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.40.15.2.1.7	hwRadiusMaxCachePackets	-
1.3.6.1.4.1.2011.5.25.40.15.2.1.5	hwRadiusThreshold	-

Impact on the System

No impact is imposed on the system. If the number of cached packets increases to the maximum number of packets that can be cached, the device releases the earliest user's all packets from the cache queue and caches newly generated accounting packets.

Possible Causes

The ratio of the number of cached packets to the maximum number of packets that can be cached reached the configured upper limit.

Procedure

1.Check whether the upper limit specified by the Threshold parameter in the alarm information is proper.

If the upper limit is proper, go to Step 2.
If the upper limit is improper, run the radius-server accounting cache-warning-threshold upper-limit upper-limit lower-limit lower-limit command to increase the upper limit for packets that can be cached.

2.Run the test-aaa command to check whether the link to the RADIUS server is normal. If the interval between request and response packets is greater than 30s, the link to the RADIUS server is busy. If no response is returned, the link to the RADIUS server is unreachable.

If the link to the RADIUS server is normal, go to Step 3.
If the link to the RADIUS server is abnormal, rectify the link fault.

3.Collect trap, log, and configuration information, and contact technical support personnel.