DEVM_1.3.6.1.4.1.2011.5.25.129.2.1.5 hwEntityReset-66591

Trap Buffer Description

Physical entity reset. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=66591, BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntPhysicalContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=Because of user operation or software exception, the entity has been reset, now it is ready.)

The physical entity reset because a part failed.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwEntityReset
Trap OID	1.3.6.1.4.1.2011.5.25.129.2.1.5
MIB	HUAWEI-BASE-TRAP-MIB
Alarm ID	0x08130094
Alarm Name	hwEntityReset
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.129.2.1.6 hwEntityResetDone-66591

Trap Buffer Parameters

Parameter	Description
BaseTrapSeverity	Indicates the physical index.
BaseTrapProbableCause	Possible reason.
BaseTrapEventType	Indicates the possible cause of the trap.
EntityPhysicalIndex	Indicates the trap type.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
RelativeResource	This object may contain a key word to indicate the relative resource of an entity.
ReasonDescription	To describe the reason of trap in DisplayString style.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.129.1.1	hwBaseTrapSeverity	-
1.3.6.1.4.1.2011.5.25.129.1.2	hwBaseTrapProbableCause	-
1.3.6.1.4.1.2011.5.25.129.1.3	hwBaseTrapEventType	-
1.3.6.1.2.1.47.1.1.1.1.4	entPhysicalContainedIn	entPhysicalIndex
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.129.1.4	hwBaseTrapRelativeResource	-
1.3.6.1.4.1.2011.5.25.129.1.5	hwBaseTrapReasonDescr	-

Impact on the System

All single boards in the reset chassis will be reset, and all the business of the chassis will be affected.

Possible Causes

Because of user operation or software exception, the entity has been reset, now it is ready.

Procedure

1. The boards in the chassis will register automatically. Check if the board can work normally after registering automatically.

If so, go to Step 4.
If not, go to Step 2.

2. Pull out the unregistered boards and replace them with new boards. Then, check whether the trap is recovered.

If so, go to Step 4.
If not, go to Step 3.

3. Collect trap information, log information, and configuration information, and then contact technical support personnel.

4. End.