DEVM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid-67593

Trap Buffer Description

Physical entity failed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[67593], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=Cause1:A power module failed.A fault occurred on the power module. Cause2:Internal communication failed for a power module. Communication between the power module and main processing unit in the same chassis failed.)

Physical entity failed.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwEntityInvalid
Trap OID	1.3.6.1.4.1.2011.5.25.129.2.1.9
MIB	HUAWEI-BASE-TRAP-MIB
Alarm ID	0x08130055
Alarm Name	hwEntityInvalid
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.129.2.1.10 hwEntityResume-67593

Trap Buffer Parameters

Parameter	Description
BaseTrapSeverity	To describe the level of trap.
ProbableCause	To describe the probable cause of trap.
BaseTrapEventType	To describe the type of trap.
EntityPhysicalIndex	The index of the physical entity.
EntContainedIn	The value of entPhysicalIndex for the physical entity.
EntPhysicalName	The textual name of the physical entity.
RelativeResource	This object may contain a key word to indicate the relative resource of an entity.
ReasonDescription	To describe the reason of trap in DisplayString style.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.129.1.1	hwBaseTrapSeverity	-
1.3.6.1.4.1.2011.5.25.129.1.2	hwBaseTrapProbableCause	-
1.3.6.1.4.1.2011.5.25.129.1.3	hwBaseTrapEventType	-
1.3.6.1.2.1.47.1.1.1.1.4	entPhysicalContainedIn	entPhysicalIndex
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.129.1.4	hwBaseTrapRelativeResource	-
1.3.6.1.4.1.2011.5.25.129.1.5	hwBaseTrapReasonDescr	-

Impact on the System

A power supply failure may lead to power supply insufficiency on the device, which affects services. This problem needs to be solved.

Possible Causes

Cause1:A power module failed.A fault occurred on the power module.

Cause2:Internal communication failed for a power module. Communication between the power module and main processing unit in the same chassis failed.

Procedure

1. Check whether the power module is connected properly and the power switch is off. If so, switch on the power. Check whether the input of the power module is normal. If not, install the power module properly. Then, check whether the alarm is cleared after the external input is complete.

If so, go to Step 5.
If not, go to Step 2.

2. Check whether the power module is inserted completely. Then, check whether the alarm is cleared after the power module is removed and inserted again.

If so, go to Step 5.
If not, go to Step 3.

3. Replace the power module and check whether the alarm is cleared.

If so, go to Step 5.
If not, go to Step 4.

4. Collect trap, log, and configuration information, and contact technical support.

5. End.