The alarm indicating that the board temperature exceeded the upper alarm threshold was cleared. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityThresholdType=[EntityThresholdType], EntityThresholdCritical=[EntityThresholdCritical], EntityThresholdCurrent=[EntityThresholdCurrent], EntityTrapFaultID=143616, Reason=The subcard temperature is normal.)
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwBrdTempAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.10.14 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x0813000d |
Alarm Name |
hwBrdTempAlarm |
Alarm Type |
environmentalAlarm |
Raise or Clear |
Clear |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.219.2.10.13 hwBrdTempAlarm-143616 |
| Parameter | Description |
|---|---|
EntityPhysicalIndex |
Indicates the index of the physical entity. |
EntPhysicalIndex |
Indicates the index of the physical entity. |
EntityTrapFaultID |
To describe the fault id of trap. |
Reason |
Indicates the description of the cause of the trap. |
EntPhysicalName |
Indicates the name of the physical entity, such as "SFU | LPU | MPU slot slotID". The entity name varies according to the board type, such as the SFU, LPU, and MPU. |
EntityThresholdType |
The abnormal type for temperature.The value can be:
|
EntityThresholdCritical |
The warning alarm threshold for warning alarm. |
EntityThresholdCurrent |
The current value that been measured. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.1 |
hwEntityPhysicalIndex |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.5.1.1 |
hwEntityThresholdType |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.5.1.5 |
hwEntityThresholdWarning |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.5.1.3 |
hwEntityThresholdCurrent |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |