DEVM_1.3.6.1.4.1.2011.5.25.219.2.6.5 hwFanInvalid-139268

Trap Buffer Description

The fan module failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=139268, Reason=The fan register failed.)

The fan function is disabled.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwFanInvalid
Trap OID	1.3.6.1.4.1.2011.5.25.219.2.6.5
MIB	HUAWEI-ENTITY-TRAP-MIB
Alarm ID	0x08130017
Alarm Name	hwFanInvalid
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.219.2.6.6 hwFanInvalidResume-139268

Trap Buffer Parameters

Parameter	Description
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntityTrapFaultID	To describe the fault id of trap.
EntPhysicalName	The textual name of the physical entity.
Reason	Reason.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.219.1.1	hwEntityPhysicalIndex	-
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.219.1.3	hwEntityTrapFaultID	-
1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2	hwEntityOperStatus	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.219.1.13	hwEntityTrapReasonDescr	-

Impact on the System

This problem will affect heat dissipation of the router; it will not affect services in a short time period, but a speedy solution is required.

Possible Causes

The fan register failed.

Procedure

1. Remove the fan module and insert it again.

If the fan module is registered, it indicates that the fan module was improperly inserted.
If the fan module is not registered, replace the fan module.

2. If the alarm persists, collect alarm information, log information and configuration information, and then contact technical support personnel.

3. End.