The communication channel failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapEntType=[EntityTrapEntType], EntityTrapFaultID=140318, EntityCommunicateType=[EntityCommunicateType], Reason=Service backup channel failed.)
The physical entity channel is faulty.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwCommunicateError |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.9.1 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x08130011 |
Alarm Name |
hwCommunicateError |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.219.2.9.2 hwCommunicateResume-140318 |
| Parameter | Description |
|---|---|
EntityPhysicalIndex |
The index for this entry. |
EntPhysicalIndex |
The index for this entry. |
EntityTrapFaultID |
To describe the fault id of trap. |
EntPhysicalName |
The textual name of the physical entity. |
EntityTrapEntType |
The type of this entity. |
EntityCommunicateType |
The type of this commnuicate. The value can be: 1. Control channel:1. 2. monitor channel:2. 3. clock channel:3. 4. data channel:4. |
Reason |
Reason integer. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.1 |
hwEntityPhysicalIndex |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.2 |
hwEntityTrapEntType |
- |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |
1.3.6.1.4.1.2011.5.25.219.1.4 |
hwEntityCommunicateType |
- |
1.3.6.1.4.1.2011.5.25.219.1.13 |
hwEntityTrapReasonDescr |
- |
1. Reset the slave board,check whether the alarm is cleared.
2. Replace the slave board,check whether the alarm is cleared.
3. Replace the master board.check whether the alarm is cleared.
4. If the alarm persists, collect information about alarms, logs, and configurations, and then contact Huawei technical support personnel.
5. End.