DRIVER_1.3.6.1.4.1.2011.5.25.157.2.114 hwLaserShutAlarmResume

Trap Buffer Description

Board laser shutdown alarm is cleared! (IfIndex=[IfIndex] SlotID=[SlotID] CardID=[CardID] PortID=[PortID] InterfaceName=[InterfaceName])

The fault that the laser on the port was shut down was rectified.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Critical

Mnemonic Code

LASER_SHUT_RESUME

Trap OID

1.3.6.1.4.1.2011.5.25.157.2.114

MIB

HUAWEI-PORT-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

IfIndex

Node ID.

SlotID

Slot ID.

CardID

Card number.

PortID

Port number.

InterfaceName

Port name.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6

hwPhysicalPortInSlot

hwPhysicalPortIfIndex

1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7

hwPhysicalPortInCard

hwPhysicalPortIfIndex

1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8

hwPhysicalPortInPort

hwPhysicalPortIfIndex

1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4

hwPhysicalPortName

hwPhysicalPortIfIndex

Impact on the System

The system is not affected.

Possible Causes

A user enabled the laser on the port through the NMS or CLI.

Procedure

This log message is informational only, and no action is required.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >