Remote DyingGasp Event occurred. (IfIndex=[IfIndex], RemoteMacAddress=[RemoteMacAddress], IfName=[IfName])
An unrecoverable event occurs, for example, the system or a board restarts, or the device is powered off.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Error |
Mnemonic Code |
DYINGGASP |
Trap OID |
1.3.6.1.4.1.2011.5.25.136.1.6.8 |
MIB |
HUAWEI-ETHOAM-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
IfIndex |
Interface index of the peer device received by the local device. |
RemoteMacAddress |
MAC address of the remote device. |
IfName |
Interface name of the peer device received by the local device. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.1 |
hwDot3ahEfmPeerMacAddress |
ifIndex |
1.3.6.1.2.1.2.2.1.2 |
ifDescr |
ifIndex |
1. After the remote device or the board on the remote device restarts, run the display efm session command to check the EFM status.
2. Collect log information and configuration information, and then contact technical support personnel.
3. End.