The number of iFIT dynamic ingress flow reaches the upper limit. (UpperLimit=[UpperLimit])
The total number of iFIT dynamic ingress flow reaches the upper limit.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
IFIT_DYNFLOW_INGRESS_REACH_LIMIT |
Trap OID |
1.3.6.1.4.1.2011.5.25.364.2.3.1 |
MIB |
HUAWEI-IFIT-MIB |
Alarm ID |
0x0CA42001 |
Alarm Name |
IFIT_DYNFLOW_INGRESS_REACH_LIMIT |
Alarm Type |
processingErrorAlarm |
Raise or Clear |
Raise |
Match trap |
IFIT_1.3.6.1.4.1.2011.5.25.364.2.3.2 hwIfitDynFlowIngressNumExceedResume |
| Parameter | Description |
|---|---|
UpperLimit |
Upper limit for the number of dynamic flow ingress on an iFIT device |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.364.1.6.1.1.1 |
hwIfitDynFlowIngressUpperLimit |
hwIfitDynFlowIngressUpperLimit |
1.On the NMS,check whether the total number of iFIT dynamic ingress flow reaches the upper limit. Delete redundant dynamic ingress flow anc check whether the alarm is cleared.
2.If the alarm persists, contant Huawei technical support personnel.