IFIT_1.3.6.1.4.1.2011.5.25.364.2.3.2 hwIfitDynFlowIngressNumExceedResume

Trap Buffer Description

The number of iFIT dynamic ingress flow is below the upper limit. (UpperLimit=[UpperLimit])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

IFIT_DYNFLOW_INGRESS_REACH_LIMIT

Trap OID

1.3.6.1.4.1.2011.5.25.364.2.3.2

MIB

HUAWEI-IFIT-MIB

Alarm ID

0x0CA42001

Alarm Name

IFIT_DYNFLOW_INGRESS_REACH_LIMIT

Alarm Type

processingErrorAlarm

Raise or Clear

Clear

Match trap

IFIT_1.3.6.1.4.1.2011.5.25.364.2.3.1 hwIfitDynFlowIngressNumExceedAlarm

Trap Buffer Parameters

Parameter Description

UpperLimit

Upper limit for the number of dynamic flow ingress on an iFIT device

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.364.1.6.1.1.1

hwIfitDynFlowIngressUpperLimit

hwIfitDynFlowIngressUpperLimit

Impact on the System

Services will not be affected.

Possible Causes

The number of iFIT dynamic ingress flow is below the upper limit.

Procedure

This message is informational only, and no action is required.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >