The number of iFIT ingress flow reaches the upper limit. (UpperLimit=[UpperLimit])
The number of iFIT ingress nodes on the device reached the upper limit.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
IFIT_FLOW_INGRESS_REACH_LIMIT |
Trap OID |
1.3.6.1.4.1.2011.5.25.364.2.4.1 |
MIB |
HUAWEI-IFIT-MIB |
Alarm ID |
0x00f10494 |
Alarm Name |
IFIT_INGRESS_REACH_LIMIT |
Alarm Type |
processingErrorAlarm |
Raise or Clear |
Raise |
Match trap |
IFIT_1.3.6.1.4.1.2011.5.25.364.2.4.2 hwIfitIngressNumExceedResume |
| Parameter | Description |
|---|---|
UpperLimit |
Maximum number of iFIT ingress nodes on a device. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.364.1.7.1.1.1 |
hwIfitIngressUpperLimit |
hwIfitIngressUpperLimit |
1. Use the NMS to check whether the number of ingresses on the iFIT reaches the upper limit. Delete redundant iFIT head nodes and check whether the alarm is cleared.
2. If the alarm persists, contact Huawei technical support.