The flow conflicts with another existing flow.(TestInstanceId=[InstanceId], FlowType=[FlowType], ConflictInstId=[ConflictInstanceId], ConflictFlowType=[ConflictFlowType])
The flow characteristics of a specified target flow in an IP FPM instance conflict with the flow characteristics of a target flow that already exists in another IP FPM instance on the same DCP.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwIpfpmDcpFlowConflict |
Trap OID |
1.3.6.1.4.1.2011.5.25.316.3.7 |
MIB |
HUAWEI-IPFPM-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
InstanceId |
IP FPM instance ID. |
FlowType |
Target flow type. |
ConflictInstanceId |
IP FPM instance ID in conflict. |
ConflictFlowType |
Target flow type in conflict. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.316.2.1.8.1.1 |
hwIpfpmDcpInstId |
hwIpfpmDcpInstId |
1.3.6.1.4.1.2011.5.25.316.2.1.10.1.1 |
hwIpfpmDcpFlowType |
hwIpfpmDcpInstId hwIpfpmDcpFlowType |
1. Check whether the flow characteristics of a newly configured target flow in an IP FPM instance overlap with the flow characteristics of a target flow that already exists in another IP FPM instance on the same DCP.
2. Check the cause of the flow characteristics overlap and resolve the problem. Then check whether the alarm persists.
3. Collect log information and configuration information, and then contact technical support personnel.
4. End.