LINK-DETECT_1.3.6.1.4.1.2011.5.25.135.2.2 hwlinkNeighborFull

Trap Buffer Description

Link neighbor is full.(SlotId =[slotid])

The number of LAD neighbors on a board reached the upper limit.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	LINKNEIGHBORFULL
Trap OID	1.3.6.1.4.1.2011.5.25.135.2.2
MIB	HUAWEI-LINKDETECT-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
slotid	Slot ID of a board on which the number of LAD neighbors reached the upper limit.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.135.1.1.2.1	hwLinkDetectSlotId	-

Impact on the System

Services will not be affected.

Possible Causes

When the number of LAD neighbors stored on a board has reached the upper limit and you attempt to discover more LAD neighbors, the log is generated.

Procedure

1. Run the display link neighbor { slot slot-id | interface interface-type interface-number | all } command to view LAD neighbor information on a specified interface of a device. Check whether unwanted LAD neighbors exist.

If unwanted LAD neighbors exist, go to Step 2.
If no unwanted LAD neighbors exist, go to Step 3.

2. Run the clear link neighbor [ interface interface-type interface-number | slot slot-id ] { sub-interface | all } command to delete unwanted LAD neighbor information. Trigger LAD neighbor discovery and check whether the log persists.

If the log persists, go to Step 3.
If the log is cleared, go to Step 4.

3. Collect log information and configuration information, and then contact technical support personnel.

4. End.