NQA_1.3.6.1.4.1.2011.5.25.302.3.1 hwLspPingProbe

Trap Buffer Description

Lsp MPLS Echo packet event. (hwLspTunnelID=[hwLspTunnelID], hwLspSenderAddress=[hwLspSenderAddress], hwLspEndPointAddress=[hwLspEndPointAddress], hwLspTTL=[hwLspTTL], hwLspHandle=[hwLspHandle])

An LSP MPLS Echo packet was received.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	NQA_LSPV_PING_NO_REPLY
Trap OID	1.3.6.1.4.1.2011.5.25.302.3.1
MIB	HUAWEI-LSP-PING-TRACE-TRAP-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
hwLspTunnelID	Lsp tunnel id.
hwLspSenderAddress	Lsp sender address.
hwLspEndPointAddress	Lsp end point address h.
hwLspTTL	Lsp TTL.
hwLspHandle	Lsp handle.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.302.2.1	hwLspTunnelID	-
1.3.6.1.4.1.2011.5.25.302.2.2	hwLspSenderAddress	-
1.3.6.1.4.1.2011.5.25.302.2.3	hwLspEndPointAddress	-
1.3.6.1.4.1.2011.5.25.302.2.4	hwLspTTL	-
1.3.6.1.4.1.2011.5.25.302.2.5	hwLspHandle	-

Impact on the System

The system will not be affected.

Possible Causes

The device receive the MPLS Echo no reply mode packet.

Procedure

This trap message is informational only, and no action is required.