NQA entry probe failed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], RttSum=[RttSum], RTTSum2Low=[RTTSum2Low], RTTSum2High=[RTTSum2High], RTTMin=[RTTMin], RTTMax=[RTTMax], PacketOutOfSequences=[PacketOutOfSequences], Errors=[Errors], Busies=[Busies], Timeouts=[Timeouts], Drops=[Drops], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], MaxDelaySD=[MaxDelaySD], MaxDelayDS=[MaxDelayDS], JitterOut=[JitterOut], JitterIn=[JitterIn], OWSumSD=[OWSumSD], OWSumDS=[OWSumDS])
Indicates that the number of testing failures in a test instance reached the set threshold. The value of the default threshold was 1. The test-failtimes command could modify the threshold.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
NQA_JITTER_PROBE_FAILED |
Trap OID |
1.3.6.1.4.1.2011.5.25.111.6.9 |
MIB |
NQA-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
OwnerIndex |
Indicates the administrator of an NQA test instance. |
TestName |
Indicates the name of an NQA test instance. |
TargetAddressType |
Indicates the type of the destination address. |
TargetAddress |
Indicates the destination address. |
OperStatus |
Indicates the status of an NQA test instance. |
Index |
Indicates the index of the result table. |
RttSum |
Indicates the RTT sum. |
RTTSum2Low |
Indicates the lower 32 bits of the RTT square sum. |
RTTSum2High |
Indicates the higher 32 bits of the RTT square sum. |
RTTMin |
Indicates the minimum RTT. |
RTTMax |
Indicates the maximum RTT. |
PacketOutOfSequences |
Indicates the number of packets with incorrect sequence numbers. |
Errors |
Indicates the number of packets with incorrect sequence numbers. |
Busies |
Indicates the number of initialization or resource application failures. |
Timeouts |
Indicates the number of times that no response is received within the timeout period. |
Drops |
Indicates the number of packets failed to be sent. |
ProbeResponses |
Indicates the number of received packets. |
SentProbes |
This object indicates the number of sent packets. |
MaxDelaySD |
Indicates the OWD from the source to the destination. |
MaxDelayDS |
Indicates the OWD from the destination to the source. |
JitterOut |
Indicates the jitter in sending packets. |
JitterIn |
Indicates the jitter in receiving packets. |
OWSumSD |
Indicates the sum of OWD from the source to the destination. |
OWSumDS |
Indicates the sum of OWD from the destination to the source. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.111.2.2.1.1 |
nqaAdminParaTargetAddressType |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName |
1.3.6.1.4.1.2011.5.25.111.2.2.1.2 |
nqaAdminParaTargetAddress |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName |
1.3.6.1.4.1.2011.5.25.111.2.3.1.9 |
nqaScheduleOperStatus |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName |
1.3.6.1.4.1.2011.5.25.111.4.3.1.5 |
nqaJitterStatsRTTSum |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.6 |
nqaJitterStatsRTTSum2Low |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.7 |
nqaJitterStatsRTTSum2High |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.8 |
nqaJitterStatsRTTMin |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.9 |
nqaJitterStatsRTTMax |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.36 |
nqaJitterStatsPacketOutOfSequences |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.37 |
nqaJitterStatsErrors |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.38 |
nqaJitterStatsBusies |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.39 |
nqaJitterStatsTimeouts |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.42 |
nqaJitterStatsDrops |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.40 |
nqaJitterStatsProbeResponses |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.41 |
nqaJitterStatsSentProbes |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.44 |
nqaJitterStatsMaxDelaySD |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.45 |
nqaJitterStatsMaxDelayDS |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.51 |
nqaJitterStatsJitterOut |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.52 |
nqaJitterStatsJitterIn |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.56 |
nqaJitterStatsOWSumSD |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.57 |
nqaJitterStatsOWSumDS |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1. Run the display this command in the NQA test view to check whether the destination address is correctly configured.If the destination address is incorrect, run the destination-address command in the NQA test view to change the destination address.Restart the test instance to check whether the test is successful.
2. Run the ping command in the NQA test view to check whether the route is reachable.If the destination address is correct but the route is unreachable, run the display ip routing-table command to check the routing table and rectify the route fault.
3. Run the display this command in the NQA test view to check whether the destination port is correctly configured.If the parameter settings are incorrect, run the destination-port command in the NQA test view to modify the parameter settings.Restart the test instance to check whether the test is successful.
4. Collect alarm and configuration information, and contact technical support personnel.
5. End