The status of the physical interface is Down. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[74752], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex],EntPhysicalName=[EntPhysicalName], ReasonDescription=The status of the physical interface is Down.)
Physical state of the port changed to down.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Alert |
Mnemonic Code |
hwPortPhysicalDown |
Trap OID |
1.3.6.1.4.1.2011.5.25.129.2.5.1 |
MIB |
HUAWEI-BASE-TRAP-MIB |
Alarm ID |
0x081300a8 |
Alarm Name |
hwPortPhysicalDown |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
| Parameter | Description |
|---|---|
BaseTrapSeverity |
To describe the level of trap. |
BaseTrapProbableCause |
To describe the probable cause of trap. |
BaseTrapEventType |
To describe the type of trap. |
EntityPhysicalIndex |
Index of the physical entity. |
EntPhysicalName |
The textual name of the physical entity. |
ReasonDescription |
Indicates the description of the possible cause. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.129.1.1 |
hwBaseTrapSeverity |
- |
1.3.6.1.4.1.2011.5.25.129.1.2 |
hwBaseTrapProbableCause |
- |
1.3.6.1.4.1.2011.5.25.129.1.3 |
hwBaseTrapEventType |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.129.1.17 |
hwPortPhysicalDownReason |
- |
1. Check the link between failure port and peer port to make sure the link is normal. Check whether the fault is rectified.
2. Run the display interface interface-type interface-number command in the user view to check the status of failure port and peer port.
3. If the failure port or peer port is in managing down status, then enter the interface view and run the undo shutdown command, check whether the fault is rectified.
4. Collect alarm information, log information and configuration information, and then contact technical support personnel.