PIC_1.3.6.1.4.1.2011.5.25.157.2.38 hwB3TcaAlarmResume

Trap Buffer Description

B3 threshold crossing alarm is cleared.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot], CardID=[hwPhysicalPortInCard], PortID=[hwPhysicalPortInPort], HpID=[hwSDHHpPerfCurrentHpIndex]. InterfaceName=[hwPhysicalPortName])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwB3TcaAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.38
MIB	HUAWEI-PORT-MIB
Alarm ID	0x0813008f
Alarm Name	hwB3TcaAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Clear
Match trap	PIC_1.3.6.1.4.1.2011.5.25.157.2.37 hwB3TcaAlarm

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwSDHHpPerfCurrentHpIndex	High-order path ID.
hwPhysicalPortName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6	hwPhysicalPortInSlot	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7	hwPhysicalPortInCard	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8	hwPhysicalPortInPort	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.3.2	hwPortPhysicalHpIndex	-
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

Services are not affected.

Possible Causes

Cause 0: The fiber cut is rectified.
Cause 1: The fault of excessive line attenuation was rectified.
Cause 2: The transmit part of the opposite station recovers from a fault.
Cause 3: The cross-connect board at the opposite station recovers from a fault or is not in position.
Cause 4: The clock board at the opposite station recovers from a fault.

Procedure

This trap message is informational only, and no action is required.