PIM_1.3.6.1.4.1.2011.5.25.149.4.0.2 invalid-register

Trap Buffer Description

PIM receives an invalid register message. (GroupMappingOrigin=[GroupMappingOrigin], GroupMappingAddressType=[GroupMappingAddressType], GrpAddr=[GrpAddr], GrpPfxLen=[GrpPfxLen], GroupMappingRPAddressType=[GroupMappingRPAddressType], RPAddr=[RPAddr], GroupMappingPimMode=[GroupMappingPimMode], InvRegAddressType=[InvRegAddressType], InvRegOriginAddr=[InvRegOriginAddr], InvRegGrpAddr=[InvRegGrpAddr], InvRegRpAddr=[InvRegRpAddr], PimInstanceID=[PimInstanceID], PimInstanceName=[PimInstanceName])

PIM received invalid Register messages.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

HW_INVALID_REG

Trap OID

1.3.6.1.4.1.2011.5.25.149.4.0.2

MIB

HUAWEI-PIM-STD-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

GroupMappingOrigin

RP type.

GroupMappingAddressType

Group address type.

GrpAddr

Group address of the invalid Register messages.

GrpPfxLen

Mask length of the multicast group address.

GroupMappingRPAddressType

RP address type.

RPAddr

Address of the RP serving the multicast group.

GroupMappingPimMode

Current PIM mode.

InvRegAddressType

Address type of the invalid Register messages.

InvRegOriginAddr

Source address of the invalid Register messages.

InvRegGrpAddr

Group address of the invalid Register messages.

InvRegRpAddr

Destination address of the invalid Register messages.

PimInstanceID

VPN instance ID.

PimInstanceName

VPN instance name.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.7

hwPimGroupMappingPimMode

hwPimGroupMappingOrigin

hwPimGroupMappingAddressType

hwPimGroupMappingGrpAddress

hwPimGroupMappingGrpPrefixLength

hwPimGroupMappingRpAddressType

hwPimGroupMappingRpAddress

1.3.6.1.4.1.2011.5.25.149.4.1.33

hwPimInvalidRegisterAddressType

-

1.3.6.1.4.1.2011.5.25.149.4.1.34

hwPimInvalidRegisterOrigin

-

1.3.6.1.4.1.2011.5.25.149.4.1.35

hwPimInvalidRegisterGroup

-

1.3.6.1.4.1.2011.5.25.149.4.1.36

hwPimInvalidRegisterRp

-

1.3.6.1.4.1.2011.5.25.149.4.1.57

hwPimInstanceID

-

1.3.6.1.4.1.2011.5.25.149.4.1.60

hwPimInstanceName

-

Impact on the System

After·the·RP·receives·an·invalid·Register·message,·the·source·that·sends·the·message·fails·to·register·with·the·RP.

Possible Causes

PIM received invalid Register messages.

Procedure

Check whether the SSM ranges of the source DR and RP are the same.

  • If the SSM ranges are the same, ensure that the RP configuration of the multicast group on the source DR is the same as that on the local device.
  • If the SSM ranges are different, run the ssm-policy command to configure the same SSM range.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >