PIM_1.3.6.1.4.1.2011.5.25.149.4.0.3 invalid-join-prune

Trap Buffer Description

PIM receives an Invalid Join/Prune message. (GroupMappingOrigin=[GroupMappingOrigin], GroupMappingAddrType=[GroupMappingAddrType], GrpAddr=[GrpAddr], GrpPfxLen=[GrpPfxLen], GroupMappingRPAddrType=[GroupMappingRPAddrType], RPAddr=[RPAddr], GroupMappingPimMode=[GroupMappingPimMode], InvJPAddrType=[InvJPAddrType], InvJPOriginAddr=[InvJPOriginAddr], InvJPGrpAddr=[InvJPGrpAddr], InvJPRpAddr=[InvJPRpAddr], NbrIfIndex=[NbrIfIndex], NbrAddrType=[NbrAddrType], NbrAddr=[NbrAddr], NbrUpTime=[NbrUpTime], NbrName=[NbrName], PimInstanceID=[PimInstanceID], PimInstanceName=[PimInstanceName])

PIM received invalid Join/Prune messages.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

HW_INVALID_JP

Trap OID

1.3.6.1.4.1.2011.5.25.149.4.0.3

MIB

HUAWEI-PIM-STD-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

GroupMappingOrigin

RP type.

GroupMappingAddrType

Group address type.

GrpAddr

Group address in the Join/Prune message.

GrpPfxLen

Mask length of the multicast group address.

GroupMappingRPAddrType

RP address type.

RPAddr

RP address.

GroupMappingPimMode

Current PIM mode.

InvJPAddrType

Address type of the invalid Join/Prune messages.

InvJPOriginAddr

Source address of the invalid Join/Prune messages.

InvJPGrpAddr

Group address of the invalid Join/Prune messages.

InvJPRpAddr

RP address of the invalid Join/Prune messages.

NbrIfIndex

Index of the neighboring interface.

NbrAddrType

Address type of the neighboring interface.

NbrAddr

Address of the neighboring interface.

NbrUpTime

Lifetime of the neighbor relationship.

NbrName

Name of the neighboring interface.

PimInstanceID

VPN instance ID.

PimInstanceName

VPN instance name.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.7

hwPimGroupMappingPimMode

hwPimGroupMappingOrigin

hwPimGroupMappingAddressType

hwPimGroupMappingGrpAddress

hwPimGroupMappingGrpPrefixLength

hwPimGroupMappingRpAddressType

hwPimGroupMappingRpAddress

1.3.6.1.4.1.2011.5.25.149.4.1.39

hwPimInvalidJoinPruneAddressType

-

1.3.6.1.4.1.2011.5.25.149.4.1.40

hwPimInvalidJoinPruneOrigin

-

1.3.6.1.4.1.2011.5.25.149.4.1.41

hwPimInvalidJoinPruneGroup

-

1.3.6.1.4.1.2011.5.25.149.4.1.42

hwPimInvalidJoinPruneRp

-

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.6

hwPimNeighborUpTime

hwPimNeighborIfIndex

hwPimNeighborAddressType

hwPimNeighborAddress

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.16

hwPimNeighborIfName

hwPimNeighborIfIndex

hwPimNeighborAddressType

hwPimNeighborAddress

1.3.6.1.4.1.2011.5.25.149.4.1.57

hwPimInstanceID

-

1.3.6.1.4.1.2011.5.25.149.4.1.60

hwPimInstanceName

-

Impact on the System

After the RP receives an invalid Join or Prune message, information about multicast members fails to reach the RP.

Possible Causes

PIM received invalid Join/Prune messages.

Procedure

Check whether the SSM range on the local device is the same as that on the device that sends J/P messages.

  • If the SSM ranges are the same, ensure that the RP configuration of the group on the local device is the same as that on the device that sends the Join or Prune message.
  • If the SSM ranges are different, run the ssm-policy command to configure the same SSM range.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >