PTP_1.3.6.1.4.1.2011.5.25.187.5.12 hwPTPRingFiberLengthChangeResume

Trap Buffer Description

The length change value of the ring-network optical fiber is determined. (hwPtpPortName=[hwPtpPortName], hwPtpPortIfIndex=[hwPtpPortIfIndex], hwPtpPortRingFiberLengthChangeValue=[hwPtpPortRingFiberLengthChangeValue], hwPtpPortRingFiberLengthChangeValueFlag=[hwPtpPortRingFiberLengthChangeValueFlag])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwPTPRingFiberLengthChange
Trap OID	1.3.6.1.4.1.2011.5.25.187.5.12
MIB	HUAWEI-PTP-MIB
Alarm ID	0x09af000a
Alarm Name	hwPTPRingFiberLengthChange
Alarm Type	equipmentAlarm
Raise or Clear	Clear
Match trap	PTP_1.3.6.1.4.1.2011.5.25.187.5.11 hwPTPRingFiberLengthChange

Trap Buffer Parameters

Parameter	Description
hwPtpPortName	Indicates the name of the current port.
hwPtpPortIfIndex	Interface index
hwPtpPortRingFiberLengthChangeValue	Indicates the new time offset caused by the fiber length change of the current port. The new time offset is the sum of the currently configured fiber asymmetry compensation value. (unit: ns)
hwPtpPortRingFiberLengthChangeValueFlag	Indicates the plus or minus sign of the new time offset caused by the fiber change of the current port. The options are as follows: Negative sign (0) Positive sign (1)

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.187.2.1.1.43	hwPtpPortName	hwPtpPortIfIndex
1.3.6.1.4.1.2011.5.25.187.2.1.1.45	hwPtpPortRingFiberLengthChangeValue	hwPtpPortIfIndex
1.3.6.1.4.1.2011.5.25.187.2.1.1.46	hwPtpPortRingFiberLengthChangeValueFlag	hwPtpPortIfIndex

Impact on the System

The system will not be affected.

Possible Causes

A new asymmetric correction value was set on the port where the fiber-length-change alarm was generated.

Procedure

This message is informational only, and no action is required.