QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.19 hwXQoSHardPipeAlarm

Trap Buffer Description

The hard-pipe service on interface [interface-name] has reached [bandwidth-usage]% of interface's hard-pipe capability.

When the hard-pipe bandwidth usage reached 95%, a warning alarm was generated. When the hard-pipe bandwidth usage reached 98%, a threshold-crossing alarm was generated.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwXQoSHardPipeAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.32.4.1.11.19
MIB	HUAWEI-XQoS-MIB
Alarm ID	0x00F10039
Alarm Name	hwXQoSHardPipeAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.20 hwXQoSHardPipeAlarmClear

Trap Buffer Parameters

Parameter	Description
interface-name	Hardpipe interface name.
bandwidth-usage	Hardpipe bandwitdh usage.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.32.4.1.23.1.1.1	hwXQoSHardPipeAlarmIfIndex	hwXQoSHardPipeAlarmIfIndex
1.3.6.1.4.1.2011.5.25.32.4.1.23.1.1.2	hwXQoSHardPipeAlarmUsage	hwXQoSHardPipeAlarmIfIndex

Impact on the System

This problem causes packet loss in the hard-pipe.

Possible Causes

The actual hard pipe service traffic exceeded the hard pipe's processing capability.

Procedure

1.Check whether the hard pipe bandwidth usage exceeds 95% (pre-alarm) or 98% (alarm).

If yes, go to Step 2.
If no, go to Step 3.

2.Increase the hard pipe bandwidth or reduce the volume of services deployed over the hard pipe. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 3.

3.Collect alarm information, log information and configuration information, and then contact technical support personnel.

4.End.