QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.61 hwXQoSHardPipeAcBandWthOverAlarm
Trap Buffer Description
The hard pipe configured on the interface [interface-name] over port bandwidth or port shaping.
The AC-side hard pipe bandwidth exceeded the interface bandwidth and became invalid.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwXQoSHardPipeAcBandWthOverAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.32.4.1.11.61 |
MIB |
HUAWEI-XQoS-MIB |
Alarm ID |
0x00F10171 |
Alarm Name |
hwXQoSHardPipeAcBandWthOverAlarm |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.62 hwXQoSHardPipeAcBandWthOverAlarmClear |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
interface-name |
Hardpipe interface name. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.32.4.1.23.1.1.1 |
hwXQoSHardPipeAlarmIfIndex |
hwXQoSHardPipeAlarmIfIndex |
Procedure
1.Run the mpls l2vpn hard-pipe bandwidth bandwidth command in the interface view to decrease the user-side hard pipe bandwidth to a value lower than the interface bandwidth or port shaping value.
Check whether the alarm is cleared.
- If yes, go to 3.
- If no, go to 2.
2.Collect alarm information, log information and configuration information, and then contact technical support personnel.
3.End.