The patch-operation failure alarm is cleared. (SlotIndex=[SlotIndex], PatchIndex=[PatchIndex], PackageName=[PackageName], PackageVersion=[PackageVersion], FailReason=[FailReason], PhysicalName=[PhysicalName].)
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwPatchInstallFail |
Trap OID |
1.3.6.1.4.1.2011.5.25.19.2.12 |
MIB |
HUAWEI-SYS-MAN-MIB |
Alarm ID |
0x0d160004 |
Alarm Name |
hwPatchInstallFail |
Alarm Type |
processingErrorAlarm |
Raise or Clear |
Clear |
Match trap |
| Parameter | Description |
|---|---|
SlotIndex |
Index of the board where the patch file is located. If it is set to 128, the device reports only one alarm. |
PatchIndex |
Index of the patch file. |
PackageName |
Patch file name. |
PackageVersion |
Patch file version. |
FailReason |
Cause of the patch installation failure. |
PhysicalName |
Name of the entity where the patch file is located. When the value of SlotIndex is 128, PhysicalName indicates the system control board, which reports alarms on behalf of the device. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.3 |
hwPatchUsedFileName |
hwPatchSlotIndex hwPatchIndex |
1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.4 |
hwPatchVersion |
hwPatchSlotIndex hwPatchIndex |
1.3.6.1.4.1.2011.5.25.19.1.8.1.8 |
hwPatchFailReason |
- |
1.3.6.1.4.1.2011.5.25.219.1.26 |
hwEntPhysicalName |
- |