The session number in all the IO boards has reached the limit, the new session can not be created. (TotalSessionLimit=[TotalSessionLimit])
The number of established BFD sessions on all boards reached the PAF upper limit, and no more sessions can be established.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
BfdSessReachLimit |
Trap OID |
1.3.6.1.4.1.2011.5.25.38.3.3 |
MIB |
HUAWEI-BFD-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
TotalSessionLimit |
Indicates the upper limit of global BFD sessions. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.38.1.3 |
hwBfdSessLimitNumber |
- |
After the number of BFD sessions reaches the upper limit, new BFD sessions cannot be created.
After this alarm is reported, the power-off or reset operation may cause resource reallocation and affect services. Therefore, you are not advised to perform the power-off or reset operation.
1. Stop configuring a new BFD session.
2. Run the undo bfd session· command to delete redundant or useless BFD sessions.
3. Collect log and configuration information, and contact technical support personnel.
4. End.