BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.2 hwUserSlotMaxNum
Trap Buffer Description
The number of user resources on the board reached the threshold. (Slot=[slotid],SlotMaxUserThreshold=[threshold])
The number of user resources on the board reached the threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwUserSlotMaxNum |
Trap OID |
1.3.6.1.4.1.2011.5.2.2.2.0.2 |
MIB |
HUAWEI-AAA-MIB |
Alarm ID |
0x0aeb202d |
Alarm Name |
hwUserSlotMaxNum |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.61 hwUserSlotMaxNumResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
slotid |
ID of the slot through which users go online |
threshold |
Upper threshold for the number of user resources |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.2.2.1.4 |
hwUserSlot |
- |
1.3.6.1.4.1.2011.5.2.2.1.5 |
hwUserSlotMaxNumThreshold |
- |
Procedure
1.In the system view, run the display this command to check whether the user resource threshold (slot-warning-threshold) is set too small.
- If the threshold is set too small, re-configure it.
- If the threshold is properly set, go to Step 2.
2.In the system view, run the display access-user slot slot-id command to check whether the number of users reaches the threshold of the board. If so, replace the board with a new one that can accommodate more user resources or go to Step 3.
3.Collect alarm, log, and configuration information, and contact technical support personnel.
4.End.