The MAC-FCS-SD of signal alarm has resumed. (IfIndex=[hwPhysicalPortThrIfIndex],IfName=[hwPhysicalPortThrName],CurrentValue=[hwPhysicalPortCrcPerCurrentValueString],AlarmThreshold=[hwPhysicalPortCrcPerAlarmThresholdString],ResumeThreshold=[hwPhysicalPortCrcPerResumeThresholdString])
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description | 
|---|---|
| Alarm or Event | Alarm | 
| Trap Severity | Critical | 
| Mnemonic Code | hwPhysicalPortCrcSd | 
| Trap OID | 1.3.6.1.4.1.2011.5.25.157.2.157.12 | 
| MIB | HUAWEI-PORT-MIB | 
| Alarm ID | 0x00F10052 | 
| Alarm Name | hwPhysicalPortCrcSd | 
| Alarm Type | processingErrorAlarm | 
| Raise or Clear | Clear | 
| Match trap | 
| Parameter | Description | 
|---|---|
| hwPhysicalPortThrIfIndex | Index of physical port. | 
| hwPhysicalPortThrName | Name of physical port. | 
| hwPhysicalPortCrcPerCurrentValueString | Current bit error rate on a physical interface. | 
| hwPhysicalPortCrcPerAlarmThresholdString | Alarm threshold for the bit error rate on a physical interface. | 
| hwPhysicalPortCrcPerResumeThresholdString | Alarm clearance threshold for the bit error rate on a physical interface. | 
| VB OID | VB Name | VB Index | 
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1 | hwPhysicalPortThrIfIndex | hwPhysicalPortThrIfIndex | 
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2 | hwPhysicalPortThrName | hwPhysicalPortThrIfIndex | 
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29 | hwPhysicalPortCrcPerCurrentValueString | hwPhysicalPortThrIfIndex | 
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.42 | hwPhysicalPortCrcSdAlarmThresholdString | hwPhysicalPortThrIfIndex | 
| 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.43 | hwPhysicalPortCrcSdResumeThresholdString | hwPhysicalPortThrIfIndex |