Threshold event occured. (IfIndex=[IfIndex], EventLogIndex=[EventLogIndex], EventLogTimestamp=[EventLogTimestamp], EventLogOui=[EventLogOui], EventLogType=[EventLogType], EventLogLocation=[EventLogLocation], EventLogWindowHi=[EventLogWindowHi], EventLogWindowLo=[EventLogWindowLo], EventLogThresholdHi=[EventLogThresholdHi], EventLogThresholdLo=[EventLogThresholdLo], EventLogValue=[EventLogValue], EventLogRunningTotal=[EventLogRunningTotal], EventLogEventTotal=[EventLogEventTotal], IfName=[IfName])
The number of errored frames, errored codes, errored frame period, or errored frame seconds exceeded the set threshold within the specified period.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Error |
Mnemonic Code |
THRESHOLD |
Trap OID |
1.3.6.1.4.1.2011.5.25.136.1.6.4 |
MIB |
HUAWEI-ETHOAM-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
IfIndex |
Interface index. |
EventLogIndex |
Index of ta printed log. |
EventLogTimestamp |
Timestamp that records when an event occurred. |
EventLogOui |
Name of an outbound interface of an event. |
EventLogType |
Type of an event. |
EventLogLocation |
Where the event occurs, on the local or remote end (1 indicates local end, 2 indicates peer end). |
EventLogWindowHi |
High-order value of a monitoring interval. |
EventLogWindowLo |
Low-order value of a monitoring interval. |
EventLogThresholdHi |
High-order value of the threshold of a monitoring interval. |
EventLogThresholdLo |
Low-order value of the threshold of a monitoring interval. |
EventLogValue |
Number of times that a threshold-crossing event occurs. |
EventLogRunningTotal |
Number of event occurrences. |
EventLogEventTotal |
Number of event notifications. |
IfName |
Interface name. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.2 |
hwDot3ahEfmEventLogTimestamp |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.3 |
hwDot3ahEfmEventLogOui |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.4 |
hwDot3ahEfmEventLogType |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.5 |
hwDot3ahEfmEventLogLocation |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.6 |
hwDot3ahEfmEventLogWindowHi |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.7 |
hwDot3ahEfmEventLogWindowLo |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.8 |
hwDot3ahEfmEventLogThresholdHi |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.9 |
hwDot3ahEfmEventLogThresholdLo |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.10 |
hwDot3ahEfmEventLogValue |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.11 |
hwDot3ahEfmEventLogRunningTotal |
ifIndex hwDot3ahEfmEventLogIndex |
1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.12 |
hwDot3ahEfmEventLogEventTotal |
ifIndex hwDot3ahEfmEventLogIndex |
1. Check the value of the EventLogType field in the trap:
2. Run the display this command in the interface view. Check whether the efm error-code threshold 0 command is displayed in the command output.
3. Run the display this command in the interface view. Check whether the efm error-frame threshold 0 command is displayed in the command output.
4. Run the display this command in the interface view. Check whether the efm error-frame-second threshold 0 command is displayed in the command output.
5. Run the display this command in the interface view. Check whether the efm error-frame-period threshold 0 command is displayed in the command output.
6. Check whether a physical link fails.
7. Run the efm error-code threshold threshold command in the interface view to set the EFM errored code detection threshold for the interface. Check whether a new event is continuously reported.
8. Run the efm error-frame threshold threshold command in the interface view to set the EFM errored frame detection threshold for the interface. Check whether a new event is continuously reported.
9. Run the efm error-frame-second threshold threshold command in the interface view to set the EFM errored frame seconds detection threshold for the interface. Check whether a new event is continuously reported.
10. Run the efm error-frame-period threshold threshold command in the interface view to set the EFM errored frame seconds detection threshold for the interface. Check whether a new event is continuously reported.
11. Rectify the physical link fault and check whether a new event is continuously reported.
12. Collect log information and configuration information, and then contact technical support personnel.
13. End.