FEI_APS_1.3.6.1.4.1.2011.5.25.119.10.2.19 hwPwApsTunnelNonSupportResumed

The alarm that PW APS does not support the current public tunnel is resumed.(VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr])

This alarm is supported only on NetEngine 8000 F1A.

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwPwApsTunnelNonSupport
Trap OID	1.3.6.1.4.1.2011.5.25.119.10.2.19
MIB	HUAWEI-L2VPN-PW-APS-MIB
Alarm ID	0x00F100ab
Alarm Name	hwPwApsTunnelNonSupport
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Clear
Match trap	FEI_APS_1.3.6.1.4.1.2011.5.25.119.10.2.18 hwPwApsTunnelNonSupport

Parameter	Description
VcID	ID of a VC
VcType	VC Type: 1: FR 2: ATM_AAL5 3: ATM_CELL_TRANSPORT 4: VLAN 5: ETHERNET 6: HDLC 7: PPP 8: CEM 9: ATM_CELL_VCC 10: ATM_CELL_VPC 11: IP_LAYER2_TRANSPORT 12: ATM_ONE_TO_ONE_VCC_CELL_MODE 13: ATM_ONE_TO_ONE_VPC_CELL_MODE 14: ATM_AAL5_PDU_VCC_TRANSPORT 15: FR_PORT 16: CEP 17: SAT_E1_OVER_PACKET 18: SAT_T1_OVER_PACKET 19: SAT_E3_OVER_PACKET 20: SAT_T3_OVER_PACKET 21: CESOPSN_BASIC_MODE 22: TDMOIP_AAL1 23: CESOPSN_TDM 24: TDMOIP_AAL2 25: FR_DLCI 26: INTERWORKING 27: VPLS 64: IP_INTERWORKING
PeerAddr	Peer IP address

Impact on the System

Services will not be affected.

Cause 1: The PW service was faulty.

Cause 2: The bearer tunnel of the PW changed to be a TE tunnel.

This trap message is informational only, and no action is required.