L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.41 hwPwSourceTunnelCheckResume

Trap Buffer Description

No mismatch packets are found during the PW source tunnel check.(PwLabel=[hwPwLabel] ,TeLabel=[hwTeLabel], PortName=[hwPortName])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwPwSourceTunnelCheckAlarm

Trap OID

1.3.6.1.4.1.2011.5.25.42.2.1.7.41

MIB

HUAWEI-L2MAM-MIB

Alarm ID

0x00F100b2

Alarm Name

hwPwSourceTunnelCheckAlarm

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.40 hwPwSourceTunnelCheckAlarm

Trap Buffer Parameters

Parameter Description

hwPwLabel

PW label.

hwTeLabel

Tunnel label.

hwPortName

Port name.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.42.2.1.43.1.1

hwPwLabel

hwPwLabel

hwTeLabel

hwPortName

1.3.6.1.4.1.2011.5.25.42.2.1.43.1.2

hwTeLabel

hwPwLabel

hwTeLabel

hwPortName

1.3.6.1.4.1.2011.5.25.42.2.1.43.1.3

hwPortName

hwPwLabel

hwTeLabel

hwPortName

Impact on the System

The system is not affected.

Possible Causes

Cause 1: The PW service failed.

Cause 2: The bearer tunnel of the PW was a non-TE tunnel.

Procedure

1.30 minutes later the alarm will clear

2.Clear the alarm by command

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >