NAT_1.3.6.1.4.1.2011.5.25.240.2.36 hwCGNUserTableExhaustAlarm

Trap Buffer Description

User tables ran out. (UserTableNum=[UserTableNum],Slot=[Slot], Cpu=[Cpu])

The NAT user table resources are exhausted.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwCGNUserTableExhaustAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.240.2.36
MIB	HUAWEI-DSLITE-MIB
Alarm ID	0x00F1001b
Alarm Name	hwCGNUserTableExhaustAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	NAT_1.3.6.1.4.1.2011.5.25.240.2.37 hwCGNUserTableExhaustResumeAlarm

Trap Buffer Parameters

Parameter	Description
UserTableNum	Number of user tables that are used.
Slot	Slot ID of a service board.
Cpu	CPU ID of the service board.

Parameter

Description

UserTableNum

Number of user tables that are used.

Slot

Slot ID of a service board.

Cpu

CPU ID of the service board.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.240.1.2.18	hwCGNAlarmUserTableNum	-
1.3.6.1.4.1.2011.5.25.240.1.2.10	hwVSUAlarmSlot	-
1.3.6.1.4.1.2011.5.25.240.1.2.11	hwVSUAlarmCpu	-

Impact on the System

User tables were used up, and new users could not be added.

Possible Causes

The number of used user tables reached the upper limit.

Procedure

1.Run the display nat user-information command to view NAT sessions established on a NAT device. Then check whether the number of used NAT user tables reaches the maximum number. - If the number of used NAT user tables has reached the maximum number, add more boards. - If the number of used NAT user tables has not reached the maximum number, go to Step 2. 2.Collect trap, log, and configuration information, and then contact technical support personnel.