QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.34 hwXQoSIfQPPBDelAlarm

Trap Buffer Description

The interface does not support QPPB outbound service class. (Interface Name = [interface-name], Policy Name = [policy-name], Direction = [direction], Precautions = [description])

The interface did not support the service class configured in the QPPB policy for downstream traffic.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	QOS_DEL_IFQPPB_POLICY_NOTIFY
Trap OID	1.3.6.1.4.1.2011.5.25.32.4.1.11.34
MIB	HUAWEI-XQoS-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
interface-name	interface name.
policy-name	policy name.
direction	1 inbound 2 outbound.
description	Description.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.32.4.1.27.1.1.1	hwXQoSIfQPPBDelInterfaceName	hwXQoSIfQPPBDelInterfaceName hwXQoSIfQPPBDelPolicyName hwXQoSIfQPPBDelDirection hwXQoSIfQPPBDelDiscrip
1.3.6.1.4.1.2011.5.25.32.4.1.27.1.1.2	hwXQoSIfQPPBDelPolicyName	hwXQoSIfQPPBDelInterfaceName hwXQoSIfQPPBDelPolicyName hwXQoSIfQPPBDelDirection hwXQoSIfQPPBDelDiscrip
1.3.6.1.4.1.2011.5.25.32.4.1.27.1.1.3	hwXQoSIfQPPBDelDirection	hwXQoSIfQPPBDelInterfaceName hwXQoSIfQPPBDelPolicyName hwXQoSIfQPPBDelDirection hwXQoSIfQPPBDelDiscrip
1.3.6.1.4.1.2011.5.25.32.4.1.27.1.1.4	hwXQoSIfQPPBDelDiscrip	hwXQoSIfQPPBDelInterfaceName hwXQoSIfQPPBDelPolicyName hwXQoSIfQPPBDelDirection hwXQoSIfQPPBDelDiscrip

Impact on the System

The interface does not support QPPB outbound service class.

Possible Causes

Cause 1: The interface did not support the service class configured in the QPPB policy for downstream traffic. Cause 2: The QPPB policy applied to the interface was deleted or invalid.

Procedure

Cause 1: The interface did not support the QPPB outbound service class function.

1. Change to an interface that supports the QPPB outbound service class function and check whether the alarm is cleared.

If the alarm is cleared, go to step 3.
If the alarm is not cleared, go to step 2.

2. Collect alarm, log, and configuration information, and contact Huawei technical support personnel.

3. End.

Cause 2: The QPPB policy applied to the interface was deleted or invalid.

1. Check whether the QPPB policy needs to be deleted.

If the QPPB policy needs to be deleted, go to step b.
If the QPPB policy does not need to be deleted, reconfigure the QPPB policy.

2. End.