VRRP_1.3.6.1.2.1.68.0.2 vrrpTrapAuthFailure

VRRP authentication failed. (vrrpTrapPacketSrc=[vrrpTrapPacketSrc], vrrpTrapAuthErrorType=[vrrpTrapAuthErrorType])

The authentication mode or authentication key of the received VRRP packets was inconsistent with that on the local device.

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Error
Mnemonic Code	vrrpTrapAuthFailure
Trap OID	1.3.6.1.2.1.68.0.2
MIB	VRRP-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Parameter	Description
vrrpTrapPacketSrc	Source IP address of the received packet.
vrrpTrapAuthErrorType	Authentication failure reason, the value of which can be: invalidAuthType authTypeMismatch authFailure.

VB OID	VB Name	VB Index
1.3.6.1.2.1.68.1.5	vrrpTrapPacketSrc	-
1.3.6.1.2.1.68.1.6	vrrpTrapAuthErrorType	-

Impact on the System

If the master and backup devices in a VRRP group are not configured with the same authentication modes, the two devices fail to negotiate.

The authentication mode or authentication key of the received VRRP packets was inconsistent with that on the local device.

1. Check whether the configurations of the local and remote ends are correct. If there is any incorrect configuration, correct it.

2. End.