nqa bier ipv6 receive rate-limit

Function

The nqa bier ipv6 receive rate-limit command sets an upper limit for the rate of sending BIERv6 Echo Request packets to the main control board.

The undo nqa bier ipv6 receive rate-limit command restores the default rate.

By default, 1000 BIERv6 echo request packets are sent to the main control board per second.

Format

nqa bier ipv6 receive rate-limit bierCpuLimit6

undo nqa bier ipv6 receive rate-limit bierCpuLimit6

undo nqa bier ipv6 receive rate-limit

Parameters

Parameter	Description	Value
bierCpuLimit6	Specifies the rate of sending BIERv6 Echo Request packets to the main control board.	The value is an integer ranging from 10 to 65535, expressed in packets per second.

Parameter

Description

Value

bierCpuLimit6

Specifies the rate of sending BIERv6 Echo Request packets to the main control board.

The value is an integer ranging from 10 to 65535, expressed in packets per second.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

As NQA is deployed on the main control board of a device, both the initiator and responder of a BIERv6 ping/tracert test need to send test packets to the main control board for processing. If a large number of packets are sent to the main control board, the CPU usage of the main control board becomes high, affecting device running. To resolve this problem, run the nqa bier ipv6 receive rate-limit command to limit the rate at which BIERv6 echo request packets are sent to the main control board.

Configuration Impact

If the number of BIERv6 Echo Request packets sent to the main control board exceeds the specified upper limit, excess packets will be discarded.

Example

# Set the upper limit for the rate of sending BIERv6 Echo Request packets to the main control board to 1500 packets per second.

<HUAWEI> system-view
[~HUAWEI] nqa bier ipv6 receive rate-limit 1500